What Is Chicken Mesh for Plaster?
Chicken wire has specific properties for plastering use. Chicken wire mesh is formed by twisting two adjacent wires at least four times, forming a strong honeycomb mesh structure. So, it has high strength and durability. Using it when plastering effectively prevents plaster layer drying out and cracking.
The hair cracks are mainly formed on the plastering layer. And mainly Hair cracks are often found on the column and brickwork joints. This happens because Contraction and expansion for concrete occur more when compared to brickworks. Hence there’s a difference between these and thus forms the crack.
Chicken mesh for plaster material virus three different
Types of Chicken Mesh as Per Material
- Wier Mesh
- Fibreglass Mesh
- Plastic Mesh for PlasteringÂ
1. Wier Mesh
As per below, different types of wire mess like.
- Light Type Expanded Metal
- Plaster Chicken Wire
- Welded Wire Mesh
- Chain Link Mesh
1.1. Light Type Expanded Metal
The expanded metal used for plastering
The expanded metal mesh is mostly used as a reinforcing material at the interior decoration, and especially when a plastering work, so sometimes referred to as stucco netting. This is manufactured from sheet steel blade, which cuts through and uniformly stretched at cells having like the diamond shape.
So, it has no welds or bends, and is durable and very strong, with a low weight. This ribbed surface makes it has the max adhesion. Each of these materials has its own disadvantages and advantages. But this best currently considered material is the light type expanded metal.
1.2. Plaster Chicken Wire
Small chicken wire mesh
The chicken wire mesh is formed by twisting both adjacent wires at least four times, creating a strong honeycomb mesh structure. So, it has high durability and strength. Its hexagonal shape prevents the formation of internal stresses.
Because of its flexible structure, chicken wire mesh is convenient for mounting on angled and curved surfaces. Its other benefits are twisted mesh, no risk of injury at work, and improved corrosion resistance.
As its mechanical properties and special physical, chicken wire is ideally suited for reinforcement plastering in construction, reinforcement waterproofing, leveling floors, and facade work.
1.3. Welded Wire Mesh
The welded wire mesh used for inside plastering workÂ
The welded wire mesh is primarily made of thin, low-carbon drawn wire or galvanized wire with a dia. of 1.5mm to 0.4mm, located in mutually perpendicular directions and interconnected by spot welding.
Its wire dia. It is much smaller than this standard welded wire mesh. The welded mesh plastering has a wide scope. It may be used for the building outside and inside the plaster reinforcement. If used for interior plasterwork and no corrosion material, needs no galvanizing, common carbon wire mesh will work well.
1.4. Chain Link Mesh
Chain link fence used as plastering mesh
The chain link Plastering mesh is a type of light chain link fence used to prevent wall cracks because of temperature changes. This chain-link fence with its lightweight, thin wire from 2.0mm to 0.5mm and small mesh opening from 5mm to 25mm, this is also called mini or micro chain wire fence.
The man is plastering to a wall using a chain-link fence as support mesh Chain link fence used as plastering mesh. Galvanized wire and low carbon steel and are its main materials. Because of the mesh for reinforcing the plaster surface doesn’t involve direct contact with the grid environment.
This is particularly important in this construction of industrial plants, in which these walls are exposed to high vibration impacts as a result of this machine, presses, and other powerful mechanisms.
2. Fibreglass Mesh
Plaster fibreglass mesh protects the wall surface
The fiberglass mesh is a cheap material that doesn’t burn and is characterized by low weight and high strength. These properties allow it to be successfully used at this formation of plaster facades, as well as use on ceiling surfaces and internal walls. This material is widely used for fastening this surface layer in the corners of the room.
This most widely used standard fibreglass plater mesh is the density of 145g/m2 and 165g/m2 for facade work and exterior cladding. The resistant to alkalis don’t decompose and will not rust over time, it doesn’t emit toxic and harmful substances, has a high resistance to tearing and stretching, protects this surface from cracking and improves its mechanical strength.
3. Plastic Mesh for PlasteringÂ
Plastic mesh used to plastering to a brick wall
The plaster plastic mesh for fast-drying dry mixes plastering Plastic mesh is recommended for plastering internal and external. Perform this function of protection against the formation and reinforcing mesh of surface crevices and cracks, increase its mechanical strength, and prevent deformation. However, its scope isn’t limited to Plastering.
The plastic plaster mesh is also successfully used at painting works and plastering by pouring floors, for sound insulation and heat wall surfaces, for the reinforcement of door and window frames, to protect the facades. A specially recommended for plaster using fast-drying dry mixes, plastic mesh with large mesh is an alternative to metal plaster mesh.
Why Use Chicken Mesh For Plaster?
To prevent a crack in plastering work we use chicken mesh at the junction. Different material such between column and wall junction where the coefficient of thermal expansion. Different material is different, and because of that, chances of crack after plastering is bound to occur, that’s why we use chicken mesh.
Chicken mesh has this same function as reinforcement does in concrete. It strengthens the plaster against forces. Mainly to avoid the crack formed due to insufficient gap filling between RCC column & Brick wall joint.
Therefore we used chicken mesh in plastering, and also due to this, there will a proper bond formation between finishing surfaces of the RCC column & Brick wall. Chicken mesh in old plaster was used to prevent cracking and hold the plaster together should the house experience settlement.
The mesh also helps fight cracks caused by the twisting of plaster laths. Nowadays, I use galvanized wire mesh screwed to old wooden lath to protect my repairs against cracking.
In exterior plastering, you shouldn’t use chicken mesh if the plastering is thinner than 20 mm since the mesh is not galvanized enough and gives you risk for rust expansion, and then the plastering will fall down before it’s due.
FAQ: Comprehensive Guide to Chicken Mesh for Plastering
What Is Chicken Mesh for Plastering?
Chicken mesh for plastering is a type of wire mesh formed by twisting two adjacent wires at least four times, creating a strong honeycomb mesh structure. It is used to reinforce plaster and prevent cracks by providing strength and durability.
Why Is Chicken Mesh Used in Plastering?
Chicken mesh is used in plastering to prevent cracks, especially at the junctions between different materials like columns and brickwork. It reinforces the plaster layer, improves adhesion, and helps in distributing the stresses uniformly.
What Are the Types of Chicken Mesh for Plastering?
There are three main types of chicken mesh for plastering:
- Wire Mesh: Includes light type expanded metal, plaster chicken wire, welded wire mesh, and chain link mesh.
- Fibreglass Mesh: A lightweight, high-strength material resistant to alkalis and corrosion.
- Plastic Mesh: Used for both internal and external plastering, known for its flexibility and resistance to deformation.
What Is Light Type Expanded Metal?
Light type expanded metal is a reinforcing material used in interior decoration and plastering. Made from sheet steel, it is cut and stretched to form a diamond-shaped mesh. It is durable, strong, and has excellent adhesion properties.
How Does Plaster Chicken Wire Differ from Other Meshes?
Plaster chicken wire is characterized by its hexagonal shape, which prevents internal stresses and provides flexibility for mounting on angled and curved surfaces. It is durable, corrosion-resistant, and ideally suited for various construction applications.
What Is Welded Wire Mesh Used For?
Welded wire mesh is used for both interior and exterior plaster reinforcement. Made from thin, low-carbon, or galvanized wire, it is spot-welded at intersections and provides strong support for plaster layers.
When Is Chain Link Mesh Used in Plastering?When Is Chain Link Mesh Used in Plastering?
Chain link mesh, also known as mini or micro chain wire fence, is used to prevent wall cracks due to temperature changes. It is lightweight and typically used in industrial settings where walls are exposed to high vibration impacts.
What Are the Advantages of Fibreglass Mesh in Plastering?
Fibreglass mesh is cheap, non-flammable, and lightweight, with high strength. It is resistant to alkalis, does not rust or emit harmful substances, and protects plaster surfaces from cracking while improving mechanical strength.
When Should Plastic Mesh Be Used for Plastering?
Plastic mesh is recommended for both internal and external plastering, especially when using fast-drying dry mixes. It prevents surface cracks, increases mechanical strength, and is also used for painting, sound insulation, and reinforcing door and window frames.
Can Chicken Mesh Be Used for Exterior Plastering?
Chicken mesh can be used for exterior plastering, but it should not be used if the plastering layer is thinner than 20 mm. In such cases, the mesh may not be sufficiently galvanized, leading to rust expansion and potential plaster failure.
How Does Chicken Mesh Prevent Cracks in Plaster?
Chicken mesh acts like reinforcement in concrete, strengthening the plaster against various forces. It helps in proper bond formation between different materials (like RCC columns and brick walls), preventing cracks due to thermal expansion and contraction differences.
Are There Any Disadvantages to Using Chicken Mesh in Plastering?
One potential disadvantage is that if the mesh is not adequately galvanized, especially in exterior applications, it may rust and cause the plaster to fail. Additionally, using chicken mesh for very thin plaster layers is not recommended.
What Materials Are Commonly Used for Chicken Mesh?
Chicken mesh is typically made from galvanized wire or low-carbon steel. Fibreglass and plastic are also used for specific applications due to their unique properties such as resistance to corrosion and flexibility.
