Roof Storm Damage Checklist: A Comprehensive Guide for Homeowners

Introduction of Roof Storm Damage Checklist

This article serves as a wind damage roof inspection guide, providing essential steps to follow after a storm damages your roof. Generally, a roof is replaced after thirty years; in the real world, there are so many things that can damage your roof, and repair, or inspection work is needed.

In America, there is a huge problem due to storms where roof repair work is required. In your country, if there is no massive issue with the storm, you can also follow those steps. So, here are some steps for roof storm damage prevention and repair.

What to Do After a Storm on Roof?

After passing the storm, we need to determine the number of damages, so here are some steps.

1. Start with the Protruding Roof Parts: First, we check the damaged parts of the skylights, chimneys, and other protruding roof parts. Those parts must be sealed properly to avoid water leaks. Then we need necessary actions for those damages.
2. Inspect the Exterior Shingles: Due to storms, the roofs of the houses are damaged widely because they protect you as a front-line defense against tough outdoor weather conditions. Then we check curling, granular loss, cracked shingles, missing shingles, etc. We need to hire a roofing contractor for inspection purposes or use a binocular.
3. Examine the Roof Vents: Sometimes, the roof’s soffit and fascia are also damaged and vents are also damaged or warped, then outdoor air comes inside.
4. Inspect the Gutters: Generally, the gutters divert the rainwater away from the house. Sometimes, the gutters get clogged, and then water backs up under the singles and starts leaking. Gutters are clogged due to the hip of twigs, leaves, and other debris on the roof shingles.
5. Check the Attic and Ceilings: If the damage has happened in the outside portion of the roof, then you need to check the attic and ceiling for signs of water spots. Wind and hail are the main causes of invisible leaks, which is very disturbing; you need to check those by using a flashlight.

Types of Roof Storm Damage

Understanding the types of roof damage is crucial, as different storms cause various damages, each requiring a unique approach to repair and prevention. There are many types of roof storm damage are there,

1. Wind

Wind damage is a common concern, and this section can be considered a part of your storm damage roof inspection. Storms like hurricanes which have high wind forces can cause severe damage to your roof.

This type of storm wind can tear or remove roof shingles; so, the roof deck is exposed. Gale winds are slower than hurricane winds and can also cause damage to your roof; they can also curl or lift up the roof shingles.

2. Hail

Hail is that type of storm that stands not more than a quarter of an hour. At this time, it can cause pockmarks and visible dents in the roof. It also loses the roof shingles, which requires immediate roof repair work.

3. Standing Water

If your roof has not had a proper drainage system, then you must face the issue of standing water problem. You need to take the necessary actions. Sometimes, clogged gutters are the main cause of standing water. Here, moisture seeps into the roof deck and creates huge problems.

4. Debris

Due to the heavy storm, debris is hurled onto the roof, and tree branches can create a huge impact on your roof surface. This can cause moisture seeping damage into your roof parts.

Roof Storm Damage Checklist

Following a storm damage inspection, it’s imperative to schedule and conduct a thorough roof inspection to assess the extent of the damage. A roof is replaced after thirty years; in the real world, there are so many things that can damage your roof, and repair, or inspection work is needed.

In America, there is a huge problem due to storms where roof repair work is required. In your country, if there is no massive issue with the storm.

It damages the roof parts, and it is very dangerous for that house owner also; so, you can also follow those steps. So, a roof storm damage checklist is the necessary and required action to protect or repair the roofs.

1. Schedule and Conduct a Roof Inspection

Here, we should contact a professional, trusted roofing contractor for inspection of the roof. There are some parameters that a contractor needs to check-

1. Roof: At first, the contractor needs to check those damages by walking around the house and taking the required notes. Then you keep the notes and take pictures of that roof damages portion. Visible damages like torn, dented, curled, missing shingles, etc., are noted down for the work.
2. Gutters, Vents, and Windows: Then we check the home gutters, roofing accessories, etc., like overhang portion, and gable vents. In windows, we inspect the cracks, loose weather stripping, broken glass, torn screens, etc.
3. Outside Areas: After that, the contractor walks around your house to look after fallen trees, posts, damaged lawn furniture, etc., and check flat surfaces like decks, and patios for hail damage.
4. Attic and Ceiling: A good professional should inspect and observe the leakage and water spot areas. These leaks can create huge problems in later times. Special attention should be taken to light fixtures, and ceiling water leaks, and flashlights should be used in the dark areas of your roof.

2. Hire a Dependable, Trusted Roofing Contractor

1. A dependable contractor can also guide you through the storm damage roof replacement inspection process if a replacement is deemed necessary.
2. It’s very necessary to work with a trustable contractor.
3. Sometimes roof repair companies offer you a big discount and deals but make sure that the repair qualities are the same as always.
4. Generally, roofing contractors can easily assess the damages with professional experience eyes.
5. They provide an estimated cost for repair purposes and then start repair or replacement works.

3. Talking to a Trusted Roofing Contractor

1. Please contact a licensed, insured contractor who can also provide a warranty for that project after finished.
2. Make sure that the roofing contractor is capable of assessing and estimating damage.
3. The main thing is you need to check out the contractor’s profile and online reviews and the experience of other people.

Roof Checklist

A roof inspection is when a roofing contractor checks the condition of your entire roof. They’ll check your roof penetrations, your attic’s ventilation, and more.

New Roof Checklist

Here, the roof checklist are as follows, also the Roofing Inspection Checklist PDF file please check.

1. General Information
   1. Name & Adress
   2. Status of Roof Owner [Applicant, Already Insured, Other (Specify)]
   3. Name of Application
   4. Application Number
2. Insured Info
   1. Name of Insured
   2. Policy Number
3. Predominant Roof
   1. Roof Geometry
      1. Flat Roof
      2. Hip Roof
      3. Mansard Roof
      4. Tented Roof
      5. Dutch Gable Roof
      6. Pavillion Roof
      7. Helm Roof
      8. Other
   2. Covering Materials
      1. Wood Shingles
      2. Asphalt Shingles
      3. Clay Shingles
      4. Tin
      5. Tile
      6. Other
   3. Roof Age
   4. Reaming Useful Life
   5. Date of Last Roofing Permit
   6. Date Update
   7. Overall Condition of Roof
      1. Excellent
      2. Good
      3. Fair
      4. Poor
      5. Other
   8. Visible Damage
      1. Curling
      2. Lifted
      3. Loose shingles
      4. Missing shingles
      5. Sagging
      6. Uneven
      7. Leaks
      8. Other
4. Secondary Roof
   1. Roof Geometry
      1. Flat Roof
      2. Hip Roof
      3. Mansard Roof
      4. Tented Roof
      5. Dutch Gable Roof
      6. Pavillion Roof
      7. Helm Roof
      8. Other
   2. Covering Materials
      1. Wood Shingles
      2. Asphalt Shingles
      3. Clay Shingles
      4. Tin
      5. Tile
      6. Other
   3. Roof Age
   4. Reaming Useful Life
   5. Date of Last Roofing Permit
   6. Date Update
   7. Overall Condition of Roof
      1. Excellent
      2. Good
      3. Fair
      4. Poor
      5. Other
   8. Visible Damage
      1. Curling
      2. Lifted
      3. Loose shingles
      4. Missing shingles
      5. Sagging
      6. Uneven
      7. Leaks
      8. Other
5. Certification
   1. Meets Standard
      1. Yes
      2. No
   2. Name of Inspector
   3. Inspector Phone Number
   4. Lince Type
   5. Lince Number
   6. Signature
   7. Date
   8. Time

New Roof Inspection Checklist PDF: Click Here  (Sorce: fulcrumapp.com)

Roof Estimate Checklist

Below are all the points used for a simple precaution of the roofing estimate checklist. With the help of these points, we can easily calculate the Roof estimate checklist.

1. Company Contact Info
2. Full Work Description
3. Start and Completion Date
4. Materials to Be Used
5. Total Cost
   1. Tearing Off the Old Roof
   2. New Shingle Installation
   3. Underlayment
   4. Flashing, Kick-Out Flashing, Counter Flashing
   5. Lead Pipe Jacks
   6. Chimney Work
   7. Ice and Water Barrier
   8. Ridge or Box Vents
   9. Flapper Vents
   10. Gutters
   11. Cleanup and Dump Fees
   12. Permits
   13. Labor
6. Warranties

Roof Replacement Checklist

This checklist for roof replacement is a valuable resource for homeowners looking to replace their roofs due to storm damage or other reasons.

Below are all the points used for a simple precaution of the Roofing Replacement Checklist. With the help of these points, we can easily calculate the Roof replacement checklist.

Roof Replacement Checklist PDF: Click Here (Source: yumpu.com)

Hail Damage Inspection Checklist

Below are all the points used for a simple precaution of the shingle roof inspection checklist. With the help of these points, we can easily calculate the hail damage inspection checklist.

1. Things to Be Inspected
   1. Individual tiles, shakes, shingles: Any dents, pockmarks, bruising, splits, cracks, splintering mineral loss?
   2. Overall appearance: E.g. the shininess of asphalt roofing
   3. Roof vents
   4. Siding
   5. The interior ceiling is there any water damage?
2. During Your Inspection
   1. Document any damage with photographs
   2. Write down any pertinent details of the storm
   3. Include the date, time & damage details
   4. Call your insurance company immediately
   5. Arrange an assessment with your insurance company

Hail Damage Inspection Checklist PDF: Click Here (Source: Civiljungle.com)

Flat Roof Inspection Checklist

Here, the flat Roof Maintenance Checklist are as follows.

Flat Roof Inspection Checklist PDF: Click Here (Source: Civiljungle.com)

TPO Roof Inspection Checklist

---

TPO Roof Inspection Checklist PDF: Click Here (Source: Civiljungle.com)

Roof Maintenance Checklist

Below are all the points used for a simple precaution of the Roof maintenance checklist. With the help of these points, we can easily maintenance the roof checklist.

1. Roof Condition
   1. General
      1. Debris
      2. Walkways
      3. Substrate
      4. Contaminants
      5. Leaks
   2. Drainage
      1. Roof Drains
      2. Scuppers
      3. Gutters
      4. Downspouts
      5. Ponding
   3. Coating
      1. Bare Spots
      2. Blisters
      3. Adhesion
      4. Cracks
      5. Pinholes
      6. Mechanical Damage
2. Membrane
   1. Blisters
   2. Cracks
   3. Mechanical Damage
   4. Bird Damage
   5. Storm Damage
   6. Soft & Spongy
   7. Wet
3. Flashing
   1. Base Flashing
   2. Counter Flashing
   3. Coping
   4. Gravel Stop/facia
4. Penetration
   1. Pipes
   2. A/c Units
   3. Vents Skylights
   4. Expansion Joints
   5. Ducts
   6. Walls

Roof Maintenance Checklist PDF: Click Here (Source: PMsilicone.com)

Metal Roof Inspection Checklist

Checklists used during the installation most often check and track activities, progress, and communication items. Each log should include the date and names or initials of key people.

This includes not only the person completing the checklist, but also the person(s) performing specific tasks, such as sealing, gutter cleaning, or other trades performing work on the roof. Examples of detailed items a daily checklist may include are:

1. Install underlayment
2. Squares installed = _______
3. Remove protective film from installed panels
4. Check and clean gutters
5. Notify electrician
6. Notify/schedule HVAC reconnect
7. Cover and secure stage material
8. Store ladders and lock gate
9. Photos
10. Clean-up

When such checklists are completed on a regular, or even a daily basis, then filed, a comprehensive record of the installation is created without any additional effort.

A useful, but often overlooked, item to include on a daily log is the addition of a section for random notes of significance. Such notes would include key factors like weather and Jobsite conditions, delays, or injuries, of any nature.

Metal Roof Inspection Checklist PDF: Click Here ( Source: metalconstruction.org)

Roof Preventative Maintenance Checklist

Below are all the points used for a simple precaution of the roof preventative maintenance checklist.

1. Cleaning of light organic and inorganic debris from the roof, drains and scuppers as needed.
2. Maintenance level repairs to parapet wall flashings as needed (re-secure metal, caulk holes, seal laps, etc.).
3. Maintenance level repairs to parapet wall flashing laps and seams as needed (seal open laps or seams with mastic or flashing tape).
4. Maintenance level repairs to the exposed masonry parapet wall as needed (temporary caulk open joints or holes; apply small temporary patches as required).
5. Temporary maintenance level repairs to the exposed masonry chimney penetra­tions as needed (temporary caulk open joints or holes; apply small temporary patches as required).
6. Maintenance level repairs to rooftop unit flashings as needed (seal open laps or seams with mastic or flashing tape).
7. Maintenance level repairs to the roof membrane as needed (seal or tape open seams and laps; minor repair of open splits or blisters; general and limited repairs to membrane conditions currently causing interior water leaks).
8. Maintenance level repairs to the roof membrane’s laps and seams as needed (seal open laps or seams with mastic or flashing tape).
9. Reset & re-attach existing walk pads as needed.
10. Reset existing metal soffit panels as needed and as accessible.
11. Maintenance level repairs to pipe flashings as needed.
12. Maintenance level repairs to pipe support as needed.
13. Maintenance level repairs to metal edging as needed (re-secure loose metal and/or seal open laps).
14. Maintenance level repairs to the metal coping as needed (re-secure loose metal and/or seal open laps).
15. Maintenance level repairs to metal fascia as needed (re-secure loose metal and/or seal open laps).
16. Maintenance level repairs to expansion joints as needed (seal open joints or holes in expansion joint material).
17. Maintenance level repairs to area divider/control joints as needed (seal open joints, seams or holes).
18. Maintenance level repairs to roof drain, overflow drains, gutters, downspouts, scuppers, and collector heads as needed (caulk or seal open-drain flashings or open metal connection joints as possible).
19. Maintenance level repairs to skylights as needed (seal open metal joints or holes).
20. Maintenance level repairs to pitch pockets/pourable sealer pockets as needed (top off-pitch pans to allow for watershed).
21. Re-fastening of loose metal termination bar as needed (tighten fasteners or replace missing fasteners and touch up open caulking).
22. Re-fastening of metal counter flashing as needed (tighten fasteners or replace missing fasteners and touch up open caulking).
23. Maintenance level repairs to metal roof areas as needed (tighten loose end-joint fasteners or replace missing fasteners; seal open laps, seams and holes).
24. Temporary maintenance level repairs to exposed metal ductwork as needed (temporary duct joint sealing to stop active leaking).
25. Temporary maintenance level repairs to roof-related EIFS walls as needed (reseal open EIFS and/or touch up open caulking).
26. Redistribute ballast as needed (limited scale and quantity, maintenance level).
27. Trim back foliage as needed and possible from roof level. Small tree branches or limited vegetation overgrowth onto a roof that can be removed at a maintenance
28. Temporarily repair shingle roof areas that can be safely accessed (re-secure shingles, and/or seal open valleys or flashings).
29. Perform an under-deck visual inspection as needed.
30. Record and catalog Maintenance Inspection Forms required to sustain the Manu­facturers warranty.
31. All maintenance level work shall be completed in accordance with OSHA stan­

Roof Preventative Maintenance Checklist PDF: Click Here (Source: technicalassurance.com)

Commercial Roof Inspection Checklist

Below are all the points used for a simple precaution of the commercial roof maintenance checklist.

1. Interior
   1. Roof Deck
      1. Corrosion
      2. Spalling
      3. Cracking
      4. Buckling
      5. Sagging
      6. Open Joints
      7. Overall Deck Condition
      8. Bitumen Drips
      9. Other:              
   2. Walls
      1. Movement
      2. Setting
      3. Cracks
      4. Spalling (Chipping or crumbing)
      5. Paint Peeling
      6. Water Strains
      7. Other:              
2. Exterior
   1. Walls
      1. Deteriorated Mortar Joints
      2. Settlement Cracks
      3. Stains
      4. Efflorescence
      5. Windows
      6. Fascia Displaced
      7. Gutter Anchors
      8. Downspouts
      9. Gutter General Condition
      10. Other:              
3. Metal Flashings
   1. Counter Flashing
      1. Loose/Missing Fasteners
      2. Loose/Displaced Metal
      3. Deformed Metal
      4. Corrosion
      5. Loose/Missing Joint Cover
      6. Check Sealant
      7. Punctures
      8. Cracked/Broken Coping Cap
      9. Open Coping Joint
      10. Other:              
   2. Coping / Cap Finishing
      1. Loose/Missing Fasteners
      2. Loose/Displaced Metal
      3. Deformed Metal
      4. Corrosion
      5. Loose/Missing Joint Cover
      6. Sealant Joints
      7. Punctures
      8. Other:              
   3. Expansion Joints
      1. Loose/Missing Fasteners
      2. Loose/Displaced Metal
      3. Deformed Metal
      4. Loose/Missing Joint Cover
      5. Sealant Joints
      6. Stripped-in Flashing
      7. Punctures
      8. Splitting
      9. Mechanical Damage
      10. Hinders Drainage
      11. Other:              
   4. Edge Metal
      1. Loose/Missing Fasteners
      2. Loose/Displaced Metal
      3. Splits in Stripped-in Flashing Joints
      4. Corrosion
      5. Loose/Missing Metal Sections
      6. Loose/Missing Joint Cover
      7. Open End Joints
      8. Sealant Joints
      9. Other:              
   5. Base Flashing
      1. Exposed Top Seal
      2. Adhesion
      3. Seams/Attachment to Field
      4. Vertical Laps
      5. Deterioration
      6. Punctures
      7. Sagging/Wrinkling
      8. Excessive Bridging
      9. Other:              
4. Penetrations
   1. General
      1. Pitch Pocket Sealant
      2. Loose Flashing
      3. Drawbands
      4. Other:
   2. Drains
      1. Strainers/Clamping Ring
      2. Clear of Debris
      3. Flashing
      4. Overall Cleanliness
      5. Other:              
   3. Rooftop Equipment
      1. Attachment to Curbs
      2. Access Panels
      3. Housing
      4. Liquid Discharge
      5. Condensation
      6. Roof Adjacent to Equipment
      7. Other:              
   4. Conduit or Pipe
      1. Sagging
      2. Supports Moving
      3. Joints
      4. Corrosion
      5. Other:              
5. Membrane/Shingle
   1. General
      1. Discoloration
      2. Coating/Surfacing
      3. Cracking
      4. Wrinkles
      5. Punctures
      6. Walkways, Displaced
      7. Walkways, Deteriorated
      8. Walkways, Needed
      9. Delamination
      10. Alligatoring
      11. Granule Adhesion
      12. Standing Water
      13. Vandalism
      14. Foot Traffic Damage
      15. Blistering
      16. Buckling
      17. Mechanical Damage
      18. Exposed Felt/Deck
      19. Hail Damage
      20. Other:              
   2. Lips
      1. Open Joints
      2. Fishmouths
      3. Other:              
   3. Membrane
      1. Unadhered Areas
      2. Blisters
      3. Loose Insulation
      4. Fasteners Backing Out
      5. Ridges
      6. Other:              
   4. Miscellaneous
      1. Antennas
      2. Guy Wises
      3. Ice or Icicles
      4. Oil Deposits
      5. Surface Contamination
      6. Soft Areas
      7. Vandalism
      8. Vegetative Growth
      9. Other:              
6. Coating
   1. General
      1. Reflectivity (Rating)
      2. Discoloration
      3. Adhesion
      4. Cracking/Peeling
      5. Crazing
      6. Other:              
7. Surfacing
   1. General
      1. Type:              
      2. Coverage/Bare spots
      3. Discoloration
      4. Gravel Stop
      5. Other:              
   2. Photographic Record
      1. Film/Digital Photography
      2. Video
      3. Other:              

*Mark all items with the appropriate code on the roof plan grid. Keep copies of inspection forms and photographic or other evidence with the Roof Historical Record.

Commercial Roof Inspection Checklist PDF: Click Here (Source: mrca.org)

Residential Roof Inspection Checklist

Below are all the points used for a simple precaution of the residetial roof maintenance checklist.

1. Interior
   1. Roof Deck
      1. Corrosion
      2. Spalling (chipping or crumbling)
      3. Cracking
      4. Buckling
      5. Sagging
      6. Open Joints
      7. Overall Deck Condition
      8. Stains/Drips
      9. Other:              
   2. Walls
      1. Movement
      2. Setting
      3. Cracks
      4. Spalling (Chipping or crumbing)
      5. Paint Peeling
      6. Water Strains
      7. Other:              
2. Exterior
   1. Walls
      1. Deteriorated Mortar Joints
      2. Settlement Cracks
      3. Stains
      4. Efflorescence
      5. Windows
      6. Fascia Displaced
3. Metal Flashings
   1. Counter Flashing
      1. Loose/Missing Fasteners
      2. Loose/Displaced Metal
      3. Deformed Metal
      4. Corrosion
      5. Sealant Joints
      6. Punctures
      7. Other:              
   2. Drains/Downspouts
      1. Strainers/Clamping Ring
      2. Clear of Debris
      3. Flashing
      4. Overall Cleanliness
      5. Gutter Anchors
      6. Drains/Downspouts
      7. Gutter General Condition
      8. Other:              
4. Penetrations
   1. General
      1. Pitch Pocket Sealant
      2. Loose Flashing
      3. Drawbands
      4. Other:             
   2. Conduit or Pipe
      1. Sagging
      2. Supports Moving
      3. Joints
      4. Corrosion
      5. Other:              
5. Membrane/Shingle
   1. General
      1. Discoloration
      2. Coating/Surfacing
      3. Cracking
      4. Wrinkles
      5. Punctures
      6. Delamination
      7. Alligatoring
      8. Granule Adhesion
      9. Standing Water
      10. Vandalism
      11. Foot Traffic Damage
      12. Mechanical Damage
      13. Exposed Felt/Deck
      14. Hail Damage
      15. Other:              
   2. Miscellaneous
      1. Antennas
      2. Guy Wises
      3. Ice or Icicles
      4. Oil Deposits
      5. Surface Contamination
      6. Soft Areas
      7. Vandalism
      8. Vegetative Growth
      9. Other:              
   3. Photographic Record
      1. Film/Digital Photography
      2. Video
      3. Other:              

*Mark all items with the appropriate code on the roof plan grid. Keep copies of inspection forms and photographic or other evidence with the Roof Historical Record.

Residential Roof Inspection Checklist PDF : Click Here (Source: mrca.org)

Frequently Asked Questions

What Should I Do Immediately After a Storm to Check for Roof Damage?

After a storm, conduct a visual inspection of your roof from the ground. Look for missing or damaged shingles, debris, and any signs of water leaks inside your home. If it’s safe, you can use a ladder for a closer look, but be cautious.

How Can I Identify Hidden Roof Damage That Isn’t Immediately Visible?

Hidden damage may include small leaks, structural damage, or issues with your roof’s underlayment. Check your attic for signs of water intrusion, such as wet insulation or water stains. A professional roof inspection is recommended for thorough assessment.

Can I Inspect and Repair Roof Damage Myself?

While minor repairs can be DIY projects, it’s best to hire a professional roofing contractor for a comprehensive inspection and repair, especially for significant or hard-to-reach damage. Professionals have the expertise and tools to safely and effectively address storm damage.

How Do I Choose a Reputable Roofing Contractor for Storm Damage Repairs?

Look for licensed and insured contractors with good reviews and references. Verify their credentials and ask for a detailed written estimate. Avoid contractors who demand full payment upfront or lack proper documentation.

What Is the Role of My Homeowner’s Insurance in Covering Storm Damage Repairs?

Most homeowner’s insurance policies cover storm damage repairs. Review your policy to understand coverage details and deductibles. Document all damage with photos and keep receipts for repairs to support your insurance claim.

How Long Do I Have to File an Insurance Claim for Roof Storm Damage?

The timeframe for filing a claim varies by insurance policy and provider. Typically, you should file a claim as soon as possible after discovering the damage. Contact your insurance company for specific deadlines and procedures.

What Temporary Measures Can I Take to Prevent Further Damage Before Repairs Are Made?

Use tarps or plastic sheeting to cover damaged areas and prevent water intrusion. Remove any loose debris from the roof and gutters. These temporary fixes can help protect your home until professional repairs are completed.

How Often Should I Have My Roof Inspected, Especially in Storm-Prone Areas?

It’s recommended to have your roof inspected at least once a year, and after any major storm. Regular inspections can help identify potential issues early and maintain the integrity of your roof.

What Are Common Signs of Roof Damage to Look Out for After a Storm?

Common signs include missing or broken shingles, dented metal components, granule loss from shingles, leaks or water stains inside your home, and visible debris on the roof.

Are There Specific Roofing Materials That Are More Resistant to Storm Damage?

Yes, materials like impact-resistant shingles, metal roofing, and rubberized asphalt can offer better protection against hail, wind, and debris. Consult with a roofing professional to choose the best materials for your area.