What Is Quarrying of Stones?
You must have heard the word mine and quarry. The operations of taking out the materials from the ground at great depths are known as mining, whereas in the case of the quarry, the operations for taking out the match as (Stone) are carried out at ground level in an exposed condition.
The process of taking out stones from the natural rock is known as “quarrying” stones thus obtained are used for various engineering purposes.
Before discussing the methods of quarrying, let us discuss the natural bed and plane of cleavage, which ply an important role in quarrying operation.
Natural BedÂ
The building stones are obtained from rocks. These rocks have a distinct plane of division along which the stones can be easily split-up. This plane is known as a “natural bed of stone.”
In stone masonry, the general rule to be observed is the direction of the natural bed should be perpendicular to the direction of the pressure, such an arrangement of stones gives maximum strength of stonework.
Natural beds of stone can be detected by pouring water and observing its fall in the direction of layers. Which respect to natural beds, stones for different work are placed in different situations as follows.
In stone arches, the stones are placed with their natural beds in a radial manner. Stone in case of cornices, string courses, etc.Should be placed in the vertical direction of natural beds. Stones of building walls should be placed horizontally in the direction of their natural beds.
Plane of CleavageÂ
Some rocks possess planes of stratification or cleavage. The rocks can be easily split along these planes. All sedimentary rocks have a distinct layer of stratification or cleavage. They are called stratified rocks.
Considerations for Quarrying of Stones
After the site selection, some important considerations are to be followed before starting the quarrying of stones.
Which are as follows:
The rock surface should be properly checked for cracks and fissures. The presence of these may cause planes in the stones, along which they may split. Then, the quarrying will be easy and quick as well as economical.
- Layout should be prepared, which contains different stages involved in quarrying operation.
- The machines used should be tested to operate them easily and quickly.
- If the top surface of the site contains soft soil, then it should be removed and dumped.
- The removal of stones should be done carefully, otherwise, there may be chances of landslides or slips, which can cause severe damage to the lives of labor.
Methods of Quarrying
Following are the common methods of quarrying
- Digging.
- Heating.
- Wedging.
- Blasting.
#1. Digging-
In this method, stones arlr merely excavated with the help of suitable instruments. This method is useful when soft stones occur at low levels in the ground.
#2. Heating-
In this method, the top surface of the rock is heated. Due to unequal expansion, the upper layer of the rock separates out and is indicated by a dull bursting noise.
The detached blocks are then removed. This method is useful when the rock formation consists of horizontal layers at shallow depth.
#3. Wedging-
If the rock surface contains cracks of fissures, this method is adopted. Steel wedges or points are driven through such cracks by means of a hammer.
Blocks of stones are then shifted, and they are removed with the help of suitable instruments. If natural cracks are not available, artificial cracks are formed. This method is adopted for rocks that are comparatively soft.
#4. Blasting-
Explosive is adopted in this method of quarrying to convert rocks into small pieces. This method is used when hand rocks having no fissures or cracks are to be broken down into small pieces.
Stone obtained by blasting is usually of small size, and they are used as ballast in railway, aggregate for concrete road metal. Etc. The following tools are required in the process of blasting. Dipper, Jumper, Priming needle, Scraping spoon, and Tamping bar.
The following materials are required in the process of blasting.
- A detonator is in the form of a copper cylinder, closed at one end. It contains 6 to 9 gm of culminating of mercury. It is used when dynamite is used as an explosive and is fired either by a fuse an electric spark.
- Explosive adopted and are generally blasting powder and dynamite. Blasting powder is also known as gun powder. It is a mechanical mixture of charcoal, saltpeter, and sulfur.
- Dynamite consists of 25% of sandy earth saturated with 75% of nitroglycerine. It is in the form of a thick paste.
- Fuses are required to ignite the explosives. They are in the form of cotton rope with a core of continuous thread of fine gun powder.
Selection of a Site for Quarrying of Stones
- Available of tools, materials, and labour.
- Transportation facilities.
- Geological data.
- Quality of stone
- Quantity of stone
- The clean water source should be available near the quarry site.
- The site should be far from permanent structures like bridges, dams, etc. because the vibrations due to blasting in the site may cause harm to them.
- The non-living area should be available to dump the refuse obtained in quarrying.
- A proper drainage facility should be available.
- Geological information on the site should be read.
FAQs about Quarrying of Stones
What is quarrying of stones?
Quarrying of stones refers to the process of extracting stones from natural rock formations, typically for use in construction or landscaping.
What are the methods of quarrying?
Common methods include digging, heating, wedging, and blasting. Each method is suited to different types of rock formations and geological conditions.
Why are natural beds and planes of cleavage important in quarrying?
Natural beds and planes of cleavage determine the direction in which stones can be easily split or quarried, influencing the efficiency and quality of the extracted stones.
What considerations are important before starting quarrying operations?
Before quarrying begins, it’s crucial to assess the rock surface for cracks, plan the layout of quarry operations, test machinery, and ensure safety measures are in place to prevent accidents.
How does blasting work in quarrying?
Blasting involves using explosives to break down large rocks into smaller pieces suitable for further processing or use in construction projects such as roads and railways.
What factors are considered in selecting a quarry site?
Factors include the quality and quantity of stone, availability of tools and labor, transportation logistics, geological data, proximity to water sources, and impact on nearby structures and environments.
How is quarrying regulated to minimize environmental impact?
Quarrying activities are often regulated to mitigate environmental concerns such as habitat disruption, erosion, and water contamination. Permits and environmental impact assessments may be required.
What are the main uses of stones obtained from quarrying?
Stones obtained from quarries are used for various purposes, including building construction, road construction, landscaping, and as raw materials for manufacturing concrete and other construction materials.
How does quarrying contribute to the economy?
Quarrying provides raw materials essential for construction and infrastructure development, contributing to local economies through job creation and revenue generation.
What safety precautions should be taken during quarrying operations?
Safety measures include proper training of personnel, regular maintenance of equipment, adherence to blasting safety protocols, and the implementation of emergency response plans to prevent accidents and injuries.
