Introduction of Foundation for House
Foundation, often referred to as house foundation types, is one of the most important parts of the Building on which the whole Structure is rest. The foundation is a very essential part of a building which provides a base for the structure.
In this article, you will get to all about the foundation, Types of house foundation, and how to build a house foundation.
Definition of Foundation
The foundation is the part of the superstructure which is one of the most important parts of the structure. It is the lowest part of the structure, often considered the home foundation, below the ground level which provides a base for the building.
The main function of the foundation of house is to receive the total load of the structure and transmit it safely to the underground soil strata without any excessive settlement of the soil.
Purpose of Providing Foundation to the Structure
The function of the foundation is as follows
- The main function of the foundation is to distribute the total weight of the structure over the larger area.
- The foundation is constructed to provide a proper level surface for the construction of the superstructure of the building.
- There may be chances of the settlement of the structure due to heavy loading on the subsoil. The foundation helps to prevent the unequal settlement.
- The foundation provides stability to the structure and prevents overturning by taking the total weight of the structure deep into the ground.
- The foundation is not provided to support the load of the structure but in fact, it serves as a means to transmit the load of the building to the soil below the foundation.
- A foundation is provided to prevent the lateral movement of the structure and increase structural stability.
Requirement of Good Foundation for the Structure
The following are the essential requirements of a good foundation
- Location of the Foundation.
- Stability of the Foundation.
- Durability of the Foundation.
- Settlement of the Foundation.
1. Location of the Foundation
The foundation should be located such that it can able to resist any unexpected influence likely to appear in the future to the structure. So care should be taken while designing the layout of the foundation.
2. Stability of the Foundation
The structural stability of the foundation of the building is a very essential requirement for the construction of a good Foundation. The foundation should be stable and safe to resist any settlement.
The foundation should be rigid to take the superimposed load which may unevenly be distributed.
3. Durability of the Foundation
The design and construction of the foundation are done in such a way that it should be durable and resist the heavy load of the structure.
4. Settlement of the Foundation
Settlement of the foundation of a building depends upon the bearing capacity of the soil. The soil Strata where the position will be constructed should be more rigid and compact to avoid the settlement of the foundation.
The foundation should be constructed such that it should not settle under the heavy superimposed load.
Why Different Types of Foundations Are Used in Construction?
Engineers have to design different types of foundation for houses, as per the bearing capacity of the soil and the site conditions.
Hence it is not possible to construct the same type of foundation for every site. Depending upon the soil profile, size, and the load of the structure different types of foundations are used.
If the foundation of this structure is constructed without understanding the ground conditions of the site then it may lead to the failure of the foundation. Once the little failure of the foundation takes place then it is difficult to improve the situation.
Types of House Foundations
The house foundations are classified into two types
- Shallow Foundation
- Deep Foundation
1. Shallow Foundation
Shallow Foundation, one of the housing foundation types, is the type of house foundation whose depth is less than or equal to the width of the foundation. The shallow Foundation is an economical and popularly used Foundation construction of lightweight structures.
The shallow foundation is the most common type of foundation which can be laid using open excavation. The shallow Foundation is used generally for a depth of 3.5 to 4m.
This type of foundation is provided for structures of moderate height which are built on sufficiently formed dry ground.
There are different types of Shallow foundations
- Wall Footing
- Isolated Footing
- Combined Footing
- Inverted Arch Footing
- Cantilever Footing or Strap Footing
- Grillage Footings
- Raft or Mat Foundation
The brief description of the types of Shallow Foundation are as follows
1.1. Wall Footings
There are two types of wall footing that are used in house foundations Simple wall footing and stepped wall footing.
For the construction of lightweight structures or temporary structures, a simple type of footing is used. The simple footing has concrete below the walls and there is no steps are provided.
In the case of heavy-load structures, the wall spreads step by step till the foundation level is reached. In the case of step footing, the area of the wall is increased to transmit the load on the larger area of soil.
The Simple wall footing is used in the construction of compound walls and lightweight structures whereas the stepped footing is used for the load-bearing structure.
1.2. Isolated Footing
The isolated footing is used to support the individual and columns. Isolated footing either be stepped footing or has a projection in the concrete base.
The isolated footing is generally used in the construction of the buildings up to five stories. The isolated footing is one of the most economical types of foundation.
1.3. Combined Footing
Sometimes there are two columns are located very near to each other, in such cases, the footings of both columns overlap each other. That’s why it is necessary to provide a combined footing for both the columns.
The condition that should be fulfilled in this type of footing is that the center of gravity of the column loads and the centroid of the footing should coincide.
There are two types of combined footing one is rectangular combined footing and the second is the Trapezoidal combined footing.
The rectangular combined footing is used when the loads on the two columns are equal. The trapezoidal combined footing is used when the lots on the two columns are unequal.
1.4. Inverted Arch Footing
This type of foundation is outdated Foundation. The inverted arch footings are suitable for the construction of bridges, tanks, underground sewers, and reservoirs.
1.5. Cantilever Footings or Strap Footing
Cantilever footing is also known as strap footing. This type of footing is used when the column is located near the boundary of the plot and it is not possible to permit the footing of that column to exceed beyond the plot boundary.
The strap beam is provided in this type of footing which helps to co-ordinate and support the load of the column which is located on the boundary. The strap beam helps to connect two columns with each other.
1.6. Grillage Foundation
Grillage Foundation is used to transmit the heavy load from the Steel columns to the soil which has low bearing capacity. This type of foundation is lighter and more economical.
1.7. Raft or Mat Foundation
- Raft Foundation is a type of foundation that consists of a thick reinforced concrete slab. this type of foundation covers the entire area of the bottom of the structure on the subsoil.
- Raft foundation is suitable where the soil on the ground is soft and has low bearing capacity.
2. Deep Foundation
The foundations for house are used where the soil below the structure within reasonable there is not capable of supporting the load of the structure. Hence it is necessary to transmit the load of the structure at a greater depth.
The function of the Deep Foundation is to transmit the load of the building to the firm layers deep inside the ground.
The deep Foundation is categorized into two types
- Pile Foundation
- Well Foundation
2.1. Pile Foundation
Pile foundations are the type of deep foundations that are constructed by the long Slender columns mainly which are made from reinforced cement concrete and steel.
2.2. Well Foundation
Well Foundation is a type of foundation which is provided below the water level. Well foundations are the same as open Caissons which are used for the bridge piers and abutments.
What Is the Best Foundation for a House?
The strongest foundation for a house is very important in the construction of the structure because the foundation is one of the most important parts of the construction. If the foundation is strong and rigid then only it can carry the total load of the Building.
If the foundation of the structure is not properly designed and it is not enough to carry the load of the structure so there is no advantage of investing money in the superstructure of the Building.
That’s why it is very essential that you should select the house foundation design, which is the best for your house. Care should be taken that the foundation should be constructed with strong building materials.
The building materials which are used in the construction of the foundation should be tested. The material should pass all the norms which are given by the Indian standards.
The best house Foundation should be constructed from strong building materials so that it will give maximum structural stability to the building and hold the house during the cyclone and earthquakes.
What Is the Strongest Foundation for a House?
The type of foundation suitable for the construction of the structure depends upon the type of soil available on the site and the type of building which we have to construct.
For the construction of lightweight or temporary structures, Shallow Foundation is used whereas for the construction of high-rise buildings deep foundations are used.
Foundations are mostly constructed from strong materials so they can hold the house in place even during earthquakes and cyclones. Therefore, they are generally made up of concrete which is the strongest construction material.
How to Build a House Foundation Step by Step?
Here is the step by step procedure for foundation of house construction. Construction of the house Foundation is one of the crucial and starting stages of the construction of the house.
Step 1: Selection of the Construction Site
Selection of the best site for the construction of the foundation is very important. The bearing capacity of the soil is checked which is available on the site.
Step 2: Marking the Layout of the Foundation
The size of the foundation is marked on the ground as per the measurements which are given in the drawing.
Step 3: Excavation of the Trenches
Destination work is done as per the measurements given in the drawing. It is necessary that the supervisor inspect whether the excavation and the depth of the foundation are as per the drawing or not.
Step 4: Anti-Termite Treatment
Anti-Termite treatment is very important to protect the house Foundation from the term attack. It is necessary that the soil around the house Foundation should be treated wale up to the plinth level with appropriate chemicals and Anti-termite treatment.
Step 5: Providing PCC to the Base of the Trenches
The next step to the construction of the building foundation is the composition of the excavated soil top layer and providing a layer of plain cement concrete on it.
Step 6: Installation of Formwork
The formwork should be provided as per the size of the footing and sufficiently rigid so that it should not displace during the composition of the concrete.
Step 7: Pouring of Concrete
The final and most important part of the construction of the house foundation is the pouring of concrete into the footing. The concrete should be properly compacted in the formwork.
Step 8: Curing of the Concrete
Curing is very necessary which will help to gain strength. Curing should be started early stage and continue for a sufficient period of time which will ensure the desired strength of the concrete.
FAQs on House Foundations
What is a house foundation?
A house foundation is the lowest part of a building structure that provides a base for the entire building. It is crucial for distributing the load of the structure to the underlying soil strata safely.
What are the main functions of a house foundation?
The main functions of a house foundation include distributing the total weight of the structure over a larger area, providing a level surface for the construction of the superstructure, preventing unequal settlement, ensuring stability, preventing overturning, transmitting loads to the soil below, and preventing lateral movement.
What are the essential requirements of a good foundation?
A good foundation should meet the following requirements: proper location to resist future influences, stability to resist settlement, durability to withstand heavy loads, and proper design to avoid excessive settlement.
Why are different types of foundations used in construction?
Different types of foundations are used based on the soil’s bearing capacity, site conditions, and the type and load of the structure. This ensures that the foundation is appropriate for the specific ground conditions and building requirements.
What are the types of house foundations?
House foundations are classified into two main types: Shallow Foundations and Deep Foundations. Shallow foundations include wall footing, isolated footing, combined footing, inverted arch footing, cantilever footing, grillage foundation, and raft foundation. Deep foundations include pile foundation and well foundation.
What is a shallow foundation?
A shallow foundation is a type of foundation with a depth less than or equal to its width. It is used for lightweight structures and is typically laid using open excavation. It is economical and suitable for depths up to 3.5 to 4 meters.
What is a deep foundation?
A deep foundation is used when the soil close to the surface cannot support the structure’s load. It transmits the load to deeper, more stable soil layers. Types of deep foundations include pile foundations and well foundations.
How do I choose the best foundation for my house?
The best foundation for your house depends on the soil type at the site, the load of the structure, and environmental conditions. Consulting with engineers and conducting soil tests will help determine the most suitable foundation type.
What materials are typically used for house foundations?
House foundations are generally constructed using strong materials like concrete, which is known for its durability and strength. These materials must meet specified standards to ensure the foundation’s stability and longevity.
How is a house foundation constructed?
The construction of a house foundation involves several steps: selecting the construction site, marking the layout, excavating the trenches, treating the soil for termites, providing a plain cement concrete (PCC) base, installing formwork, pouring and compacting concrete, and curing the concrete to ensure it gains strength.
What is the importance of curing in foundation construction?
Curing is essential in foundation construction as it helps the concrete gain the desired strength. Proper curing should begin early and continue for a sufficient period to ensure the foundation’s durability and stability.
What is the difference between isolated footing and combined footing?
Isolated footing supports individual columns and is typically used in buildings up to five stories. Combined footing is used when two columns are close to each other, and their footings overlap, necessitating a shared footing to balance the load effectively.
What is a raft or mat foundation?
A raft or mat foundation is a thick, reinforced concrete slab covering the entire area of the structure’s base. It is suitable for soft soils with low bearing capacity, providing a stable base for the building.